Klober Uni Dry Verge
Product features & benefits:
- Mortar free
- All weather fixing
- Secure mechanical fixing avoids wind uplift problems
- Quick and easy to fit – no special tools required
- Available in 5 colours to blend in with roof tiles
- Neat attractive appearance
- Weatherproof and maintenance free
- Unaffected by settlement or differential movement
- UV stable
- Prevents entry of birds and large insects
Area of application:
Suitable for
- Refurbishment or new build on roofs from 12.5° to 90°
- Makes and profiles of concrete interlocking tiles between 280-345mm batten gauge
Material
- Dry Verge unit- UPVC
- Eaves Closure- UPVC
- Ridge Closure-UPVC
- Ridge End Cap- polypropylene
- Batten End Clip- stainless steel
Colours
- Brown
- Slate grey
- Terracotta
- White
Dimensions
403mm long x 148mm wide x 70mm deep
Weight (per carton)
14.3kg
Packaging
Dry Verge Units
10 units per pack- 5 packs per carton
Eaves Ridge Pack
2 Ridge Closures, 2 Eaves Closures and nails- 20 packs per carton
Ridge End Pack
2 Ridge End Caps and 4 screws- 10 packs per carton
Batten End Clips
10 clips per pack- 5 packs per carton
Installation
Extend the tiling battens 20mm beyond the gable wall or bargeboard and nail a Batten
End Clip to the end of every batten. Fix the Eaves Closure to the end of the fascia
board or brickwork. Slide the first Uni-Dry Verge Unit over the Eaves Closure and the
bottom tile. Nail into the tiling batten through the Batten End Clip.
As each successive verge tile is laid, slide on a Uni-Dry Verge Unit, engaging with the
Unit below, and nail in position, through the Batten End Clip into the batten.
Insert a Ridge Closure into the last Unit, interlocking the combs of each Uni-Dry Verge
Unit at the apex. Screw fix the Ridge End Cap to the ridge batten.
When installing onto an existing verge the old mortar between the tiles and the
undercloak must be removed prior to the verge units being fitted. The tile battens
must overhang the gable wall or bargeboard by 20mm and a Batten End Clip nailed
to each batten.
If a batten end clip is not being used we recommend that the batten is extended
30mm over the barge board or brickwork and 40mm (minimum) x 3.25mm ring shank
nails are used to fix the verge units. Prior to fixing the batten ends must be in good
condition with no signs of decay.
