Firestone Rubber Cover – Products / Accessories
Please find below a selection of the Firestone products and accessories we keep in stock, here at FRRC. Firestone offers a complete range of accessories and tools to facilitate the installation of the RubberCover™ membrane, while achieving superior system performance on the roof.
- EPDM Membrane
- Bonding Adhesive
- QuickPrime Plus
- QuickSeam Batten Cover Strip
- Corner Flashing
- QuickSeam Pipe Boot
- QuickSeam SA Flashing
- QuickScrubber pad and handle
- Hand Roller
High quality EPDM membrane
Firestone RubberCover™ EPDM membrane is a 100% cured single-ply roofing membrane made of a Ethylene-Propylene-Diene Terpolymer offering unique features and benefits.
For decades Firestone EPDM rubber roofing membranes have been successfully installed on hundreds of thousands of commercial and industrial roofs worldwide. Today, the high performing Firestone EPDM membranes are also available to cover small residential flat roofs.
Roll sizes:
Firestone RubberCover™ EPDM membranes are available in large, seamless sheets up to 6.10 m in width, however, smaller sizes are available.
Sizes:
- 3.05 m x 7.62 m
- 4.57 m x 7.62 m
- 6.10 m x 7.62 m Packed on 1.80 m long cores
- Thickness 1.0 mm
- Weight 1.27 kg/m²
Note: Special sizes are available upon request.
Firestone RubberCover™ Bonding Adhesive
Firestone RubberCover™ EPDM membrane must always be fully adhered to the substrate using RubberCover™ Bonding Adhesive, a contact adhesive that is to be applied both on the membrane and the substrate.
- Packaging – 10 litre can
- Coverage – 1 litre per 2 m² (both sides)
Shelf life Min. 12 months, if stored in original sealed cans at temperatures between 15°C and 25°C.
Once opened, the Bonding Adhesive must be used within 48 hours.
Firestone RubberCover™ QuickPrime Plus
Used to clean and prime the RubberCover™ EPDM membrane prior to application of all QuickSeam products.
- Packaging – 0,95 litre can
- Coverage – 1 can for 20 lm seam or for 15 patches of RubberCover™ QuickSeam SA Flashing in size 45 cm x 45 cm
1 can for 4.5 m² of gutter surface
Shelf life Min. 12 months, if stored in original sealed cans at temperatures between 15°C and 25°C.
Firestone RubberCover™ QuickSeam Batten Cover Strip
Used to splice adjoining RubberCover™ EPDM membrane panels on the roof.
- Dimensions 1 roll = 15.25 cm (width) x 7.62 m (length)
Shelf life Min. 12 months, if stored in original sealed packaging at temperatures between 15°C and 25°C.
Firestone RubberCover™ QuickSeam Corner Flashing
Used for flashing outside corners and for repairs if needed.
- Packaging – By the piece
- Dimensions – 1 piece = 22 cm diameter
Shelf life Min. 12 months, if stored in original sealed packaging at temperatures between 15°C and 25°C.
Firestone RubberCover™ QuickSeam Pipe Boot
Used for flashing pipe penetrations from 2.5 cm up to 15 cm diameter.
- Packaging – By the piece (supplied with clamping ring)
- Dimensions – 2.5 cm to 15 cm in diameter
Shelf life Min. 12 months, if stored in original sealed packaging at temperatures between 15°C and 25°C.
Firestone RubberCover™ QuickSeam Self Adhesive Flashing
Used for sealing drains, skylights, vents or gutters.
Packaging:
- 1 roll/box
- 10 patches of 45 cm x 45 cm/box
Dimensions:
- 1 roll = 45 cm (width) x 15.25 m (length)
- 1 patch = 45 cm x 45 cm
Shelf life Min. 12 months, if stored in original sealed packaging at temperatures between 15°C and 25°C.
Firestone RubberCover™ QuickScrubber pad and handle
Used for application of RubberCover™ QuickPrime Plus primer.
- Packaging – By the piece
- Coverage – 2 pads and 1 handle per litre of QuickPrime Plus primer
Firestone RubberCover™ Hand Roller
Used for rolling seams and installation details after application of QuickSeam Products.
- Packaging – By the piece
