Versasteel Roof Sheeting
Versasteel 1000 Tile Effect Sheet
The Versasteel 1000 Tile Effect Sheet is light in weight, simple to fit and is available in a wide range of colours. Being so light in weight, it is ideal for over roofing or flat to pitch conversions.
Because Versasteel is almost maintenance free, it is an ideal product for schools, hospitals and other public buildings.
Versasteel 1000 is manufactured in one week. Sizes can be made bespoke and colours available as per the images, please see the PDF image for dimensions.
Available Colours
Fixing Details:
VERSASTEEL .7mm fixing details:
Position and fix Versasteel sheets from Ridge to Eaves. Take care to align the sheet square to the Ridge/Eaves Axis and not parallel to the Gable. To assist, an Alignment Board can be fixed at the distance of 40mm from the front face of the Eaves Fascia and the Tile sheets fixed accordingly. Tile sheets to be fixed down to battens with Self Drill, Tap Fasteners minimum 25mm long with EPDM or Neoprene Sealing Washers or special Fixings for fixing to steel purlins.
Care should be taken to ensure correct compression of the Sealing Washer. The Fasteners are always to be positioned in the base of the Profile Pan. This obtains a direct fixing from the sheet to the batten and in accordance with the relevant codes of practice. Fastener consumption to be a minimum of 6 per m2 of tile sheet area. Alternatively, the Versasteel sheets can be fixed by special fixings for fixing into steel purlins. There should be a minimum of 3 fixings per purlin OR every bottom panel if High Wind location indicate extra precautions. If the site is of an exposed nature and/or subject to High Winds and driving rain/snow, the sheet side laps should be sealed with gx3 Butyle Tape and stitched at tile centres with stitching Screws. Fixing to have matching Colour Caps as per the Tile Sheet.
Trim Section and Accessories: Ridge & Gable:
Fix Ridge Section to main tile sheet at every 500 mm centres with Self Drill and Tap Stitching Screws with matching Colour Caps. Ridge Sections to have an overlap of 100 mm, insert profiled Foam Fillers between underside of Ridge and top side of sheet. Fillers to be held in position with a suitable Mastic Sealant. Position and fix end caps to ridge ends. Position and fix gable trim sections from ridge end to eaves at gable ends. Gable trims to have an overlap of 150mm and cut and formed to close as ‘Boxed End’ at eaves end trim.
Contact John for more information or give us a call on 0161 724 4004
